肃北县二段井地区铅多金属矿土壤地球化学特征及找矿前景          下载免费PDF全文

高正海  史梁 《甘肃地质》2021,(2):35-42

通过对北山南带二段井铅多金属矿开展1∶1万土壤地球化学测量,结合成矿地质条件进行了土壤地球化学找矿研究。得出以下几点认识:1)矿区土壤中Au、Pb富集系数和变异系数大,成矿潜力好;2)相关分析、因子分析表明Ag、Zn,As、W、Mo,分别代表了中低温成矿作用,可作为Au、Pb的间接找矿标志;3)圈定了7个综合异常,在HT4号异常区中圈定1条金铅矿体,认为该异常区找矿前景很好,是寻找热液型矿床的有利地区,为下一步找矿工作重点靶区。  相似文献   

黄铁矿热电性在铜矿床深部找矿预测中的应用——以滇中和尚洞铜矿Ⅰ号矿体为例     

李灿明  李波 《矿物岩石地球化学通报》2021,40(2):470-477

黄铁矿热电性是矿床学及深部地质找矿的重要研究内容之一,该方法多应用于金矿床的地质勘探,而在铜矿床勘探中应用较少。滇中和尚洞铜矿床属于中高温热液矿床,矿体宏观地质条件差异小,深部找矿难度大,本文对该矿床Ⅰ号矿体开展了黄铁矿热电性特征及深部找矿预测研究。结果表明,该矿床黄铁矿热电系数分布呈现多峰组合,矿体铜矿化强度与黄铁矿P-N型的出现率及离散度等关系密切,尽管1580中段仍存在工业矿体,但Ⅰ号矿体深部延伸相对较小,找矿前景相对较差。研究表明,利用黄铁矿热电系数特征指导铜矿床的深部找矿预测是可行的。  相似文献   

特提斯喜马拉雅铅锌锑金成矿带含炭质岩石中热液脉型矿床的综合电法勘探——以西藏扎西康铅锌锑多金属矿为例          下载免费PDF全文

郭镜  焦彦杰  梁生贤 《沉积与特提斯地质》2021,41(4):612-624

扎西康铅锌锑多金属矿床产出于特提斯喜马拉雅炭质板岩的断裂带内,是特提斯喜马拉雅铅锌锑金成矿带内典型的热液脉型矿床。由于含炭质岩石和金属硫化物都呈现出相似的低阻高极化电性特征,加之热液脉型矿床的矿体普遍较小,使得在含炭质岩石中对金属硫化物矿体进行电法勘探存在较大困难。本文通过对扎西康矿床已知矿体的音频大地电磁测深和激电中梯测量,发现矿区的炭质板岩呈现低电阻率(10^-0.4~10⁰Ω·m)和高极化率(9%~20%)特征,而矿体呈现出高电阻率(10²~10³Ω·m)和低极化率(1%~5%)的特征。经研究分析,认为造成这种现象的原因有两方面：(1)扎西康炭质板岩中的炭质物质量分数平均为0.79%,变质温度约在300±25℃~340±25℃,炭质物电阻率为6.1×10^-5~6.8×10^-4Ω·m,显示极好的导电性;此外,炭质板岩中存在大量黏土矿物,黏土矿物的吸水性促进了炭质物的连通性,因此炭质物高导电性与连通性的耦合使得炭质板岩呈现低阻高极化电性特征;(2)扎西康矿床的脉型矿体除包含金属硫化物外,还产出大量的脉石矿物,脉石矿物普遍具有高阻低极化电性特征,是造成整个矿体在炭质板岩中呈现高阻低极化异常的根本原因。据此,本文提出在炭质板岩中通过识别脉石矿物引起的高阻低极化异常带间接找矿的新思路,相应的技术方法组合为：利用激电中梯测量定位高阻低极化带的平面位置,再利用音频大地电磁测深探测其深部产状。  相似文献   

中国西北地区岩浆铜镍矿床地质特点与找矿潜力     

张照伟  钱兵  王亚磊  李文渊 《西北地质》2021,(1)

西北地区是中国岩浆铜镍硫化物矿床最为发育的地区,主要有3个重要成矿期,其地质特点、成矿条件、形成标志等存在明显不同。笔者梳理了目前诸多学者对岩浆铜镍硫化物矿床的研究工作,并结合野外实际,发现大陆裂谷是形成巨型-超大型岩浆铜镍硫化物矿床的构造背景条件,铁质系列的镁铁-超镁铁质岩体才可能形成有经济价值的岩浆铜镍硫化物矿体。超壳深大断裂为地幔岩浆上涌提供了有利条件。分异良好的超基性岩体更具有成铜镍矿的潜力。结晶分异促进了硫化物饱和,地壳混染是成矿的关键。橄榄石和单斜辉石具有低的CaO和FeO含量的岩体,更有利于形成规模较大的岩浆铜镍硫化物矿体。这些研究认识与发现为理解西北地区镁铁-超镁铁质岩浆成矿作用过程、找矿潜力预测及找矿方向和找矿空间提供了技术支撑与资料基础。  相似文献   

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review     

《China Geology》2021,4(4):686-719

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.  相似文献   

Research achievements of the Qinghai-Tibet Plateau based on 60 years of aeromagnetic surveys     

《China Geology》2021,4(1):147-177

The Qinghai-Tibet Plateau (also referred to as the Plateau) has long received much attention from the community of geoscience due to its unique geographical location and rich mineral resources. This paper reviews the aeromagnetic surveys in the Plateau in the past 60 years and summarizes relevant research achievements, which mainly include the followings. (1) The boundaries between the Plateau and its surrounding regions have been clarified. In detail, its western boundary is restricted by West Kunlun-Altyn Tagh arc-shaped magnetic anomaly zone forming due to the arc-shaped connection of the Altyn Tagh and Kangxiwa faults and its eastern boundary consists of the boundaries among different magnetic fields along the Longnan (Wudu)-Kangding Fault. Meanwhile, the fault on the northern margin of the Northern Qilian Mountains serves as its northern boundary. (2) The Plateau is mainly composed of four orogens that were stitched together, namely East Kunlun-Qilian, Hoh-Xil-Songpan, Chamdo-Southwestern Sanjiang (Nujiang, Lancang, and Jinsha rivers in southeastern China), and Gangdese-Himalaya orogens. (3) The basement of the Plateau is dominated by weakly magnetic Proterozoic metamorphic rocks and lacks strongly magnetic Archean crystalline basement of stable continents such as the Tarim and Sichuan blocks. Therefore, it exhibits the characteristics of unstable orogenic basement. (4) The Yarlung-Zangbo suture zone forming due to continent-continent collisions since the Cenozoic shows double aeromagnetic anomaly zones. Therefore, it can be inferred that the Yarlung-Zangbo suture zone formed from the Indian Plate subducting towards and colliding with the Eurasian Plate twice. (5) A huge negative aeromagnetic anomaly in nearly SN trending has been discovered in the middle part of the Plateau, indicating a giant deep thermal-tectonic zone. (6) A dual-layer magnetic structure has been revealed in the Plateau. It consists of shallow magnetic anomaly zones in nearly EW and NW trending and deep magnetic anomaly zones in nearly SN trending. They overlap vertically and cross horizontally, showing the flyover-type geological structure of the Plateau. (7) A group of NW-trending faults occur in eastern Tibet, which is intersected rather than connected by the nearly EW trending that develop in middle-west Tibet. (8) As for the central uplift zone that occurs through the Qiangtang Basin, its metamorphic basement tends to gradually descend from west to east, showing the form of steps. The Qiangtang Basin is divided into the northern and southern part by the central uplift zone in it. The basement in the Qiangtang Basin is deep in the north and west and shallow in the south and west. The basement in the northern Qiangtang Basin is deep and relatively stable and thus is more favorable for the generation and preservation of oil and gas. Up to now, 19 favorable tectonic regions of oil and gas have been determined in the Qiangtang Basin. (9) A total of 21 prospecting areas of mineral resources have been delineated and thousands of ore-bearing (or mineralization) anomalies have been discovered. Additionally, the formation and uplift mechanism of the Plateau are briefly discussed in this paper.©2021 China Geology Editorial Office.  相似文献   

西藏改则县多龙矿集区斑岩型铜金矿床的地质特征与成矿-找矿模型   总被引：8，自引：3，他引：5  

陈红旗  曲晓明  范淑芳 《矿床地质》2015,34(2):321-332

多龙矿集区位于班公湖_怒江成矿带西段、羌塘地块南缘的岩浆弧中。过去十多年来,西藏地勘局第五地质大队在多龙矿集区内已发现和评价了多不杂、波龙、地堡那木岗、拿若、荣那等5处大型、超大型铜金多金属矿床,目前已探明的铜资源量近1000万吨,金300余吨。区内以斑岩型铜金矿床为主,兼有斑岩_浅成低温热液型和斑岩_角砾岩型矿化组合。研究发现,矿区黄铁矿的δ34S值变化于-2.2‰~2.3‰之间,平均为0.2‰,峰值在-1‰~1‰之间,塔式效应明显,接近幔源硫,显示成矿物质来源于深部岩浆;成矿温度介于250~420℃之间,成矿深度1~5 km,成矿流体为残余岩浆流体,大气降水在成矿过程中的作用不明显。作者根据多年的勘查实践,总结出多龙矿集区斑岩型铜金矿最有效的找矿勘查方法技术组合是:地质+化探(水系沉积物)+物探(高精度磁测、激电中梯)+钻探。  相似文献   

甘肃成矿系列研究及矿产勘查新突破   总被引：1，自引：0，他引：1  

张新虎  任丰寿  余超  刘建宏  赵彦庆  张发荣  贾志磊 《矿床地质》2015,34(6):1130-1142

甘肃省地质环境复杂,成矿条件优越,矿产资源相对丰富,构造上位于古亚洲、滨太平洋、特提斯三大构造域的交接部位,有北山、祁连山、西秦岭3个北西-南东向造山带,其间夹持着敦煌、阿拉善、中-南祁连、鄂尔多斯等地块。根据甘肃省的构造演化、岩石建造组合及矿产分布规律,运用成矿系列理论,对全省各成矿单元成矿系列和谱系作了初步研究与梳理,重新划分出10个成矿系列组,54个成矿系列,42个成矿亚系列,82个矿床式。在此基础上,进一步归并出4个矿床成矿系列组合、16个矿床成矿系列类型。通过归纳总结祁连山-龙首山、秦岭成矿区矿床成矿谱系,依据甘肃主要成矿大区不同构造环境、成矿旋回和成矿系列发育特征,运用缺位找矿思维,调整对区域矿产勘查工作部署,开展新区域、新层位、新类型、新矿种勘查找矿,取得重要成果。西秦岭地区玛曲县大水金矿、夏河县加甘滩金矿找矿成果卓著,先后列为国土资源部2010年度、2014年度全国10大找矿成果,西成铅锌矿田厂坝老矿山深部勘查资源储量大幅度增加,发现大桥金矿新类型;北祁连西段卡瓦铁矿富集区评价取得新进展,将成为镜铁山铁矿资源接续区;阿尔金成矿带青砂沟锰矿勘查实现新层位找矿突破,显示出成矿系列理论在指导区域成矿规律研究方面具有强大的生命力和科学依据。甘肃省内已设置国家级整装勘查区5个,据《2012年全国主要矿产资源储量通报》,甘肃省金矿资源储量跃居全国第2位,锰矿居全国第8位,锌、铅矿分别位稳居全国第3、6位,找矿潜力巨大。  相似文献   

黑龙江多宝山——大新屯地区铜金多金属成矿作用及找矿方向   总被引：1，自引：0，他引：1  

韩振哲  刘娜  公凡影  李永胜  李仰春  姚磊 《地质论评》2015,61(4):787-796

黑龙江省多宝山—大新屯地区,铜矿以中—晚加里东期多宝山式斑岩型、燕山早期三矿沟式矽卡岩型为主,晚古生界海底火山岩有关喷发—沉积型铜锌矿床,具优越的成矿潜力,不同时期、类型铜矿床在空间分布上明显受古生代海相火山岩—碳酸盐岩建造控制,并具有"上金下铜"的斑岩—热液型铜金矿成矿系统的特征。金矿以燕山晚期三道湾子式浅成低温热液型金成矿作用强烈为特点;持续时间由早石炭世—早—中侏罗世的韧性剪切—走滑作用、中侏罗世为主要伸展期的变质核杂岩有关的金成矿作用,以及奥陶纪浊积岩(卡林型)有关金成矿作用,以中—小规模金矿床(点)为主;金矿受北西向、北东向的火山构造、变质核杂岩构造和韧性剪切—走滑作用控制,显示出良好的金找矿前景;结合近期的铜金矿重大勘查进展和成果,总结成矿规律,梳理了制约着铜金多金属矿找矿突破的关键地质问题,提出找矿方向和今后勘查工作部署建议。  相似文献   

青海省都兰县郭勒纸铜矿区地质特征及找矿前景浅析     

王彦明  李军  张国权 《山东国土资源》2015,31(8)

工作区位于东昆仑山脉中段,布尔汗布达山南坡。区域上断裂构造较为发育,岩浆活动频繁,岩浆热液以及岩浆期后热液活动强烈,为成矿元素的进一步活化、运移、富集创造了条件。该文对区内的成矿地质背景、矿床地质特征,矿石特征、矿床成因及控矿因素进行研究分析,认为该矿床有着较好的找矿前景。同时也确定地层标志、构造标志、蚀变标志为其找矿标志,以指导后续普查工作的有效进行。  相似文献